Gunsmithing

 

Handguns:

  • Full stripping, servicing and cleaning: All individual parts are checked for wear, then cleaned and serviced if necessary before reassembling.

R400

  • Trigger job: Polishing and truing of trigger sears, and spring tension setting within safety limits for a clean, crisp pull.

Single action: R700

Double action: R850

  • Ramp, throat and port: We polish your pistol’s feeding ramp, chamber throat and ejection port to ensure reliable ammo feeding and to prevent jamming.

R1100

  • Revolver timing: Truing of the forcing cone and setting of the cylinder gap to prevent misalignments, misfires and unsafe bullet shavings.

R1250

  • Refinishing: Metal is polished to remove damage if necessary and a new coating is applied.

Matte or satin reblueing: R1350

Guncote in black or silver: R1500

Cerakote: R2700

Cerakote 2 tone: R4850

Cerakote 3 colour: R7250

Gloss blue: SQ, depending on damage

  • De-activation: We de-activate your firearms for display purposes. The process takes up to three months.

R1150

  • Silencers: Fitting and barrel threading, including a thread protection cap.

R1149

 

Rifles:

  • Scope mounting:

-We’ll securely mount your scope and bore sight it, to save you ammo and time when you do the final adjustments on the shooting range. If the scope or rifle is bought from us, this service is free of charge.

Price???

Additional mounting services:

-Action drilling and tapping: We can adjust the action in cases where this was done incorrectly, in order to mount a scope.

R850

-Cut and bend bolts:  When the bolts prevent proper mounting, we cut and/or bend them to enable mounting.

R1280

-Dovetail action: This allows secure scope mounting on older rifles.

R1750

  • Cleaning:

-Standard cleaning and lubrication: We use only high-quality solvents and lubricants.

R140

-Full stripping, servicing and cleaning: All individual parts are checked for wear, cleaned and serviced if necessary before reassembling.

R550

-Chamber polishing: We polish your rifle’s chamber to ensure reliable ammo feeding and prevent jamming.

R960

  • Accuracy improvements and triggers:

-Zeroing: Done at the distance of your choice with manufactured or hand-loaded ammunition, or from our ammo stock at current prices if you can’t bring your own. Ballistic trajectory charts (bullet drop figures) are also provided.

Price???

-Trigger adjustment: If your rifle has an adjustable trigger, we’ll set it to your liking for a clean, crisp pull within safety margins.

R250

-Trigger job: Polishing and truing of trigger sears, and spring tension setting within safety limits for a clean, crisp pull.

R900

-Cut and crown: We cut and crown your rifle’s barrel to improve accuracy.

R1000

-Bedding and floating: Glass or steel pillar bedding for rifle actions, and barrel floating, to improve accuracy. Three shot test groups included.

Glass: R1350

Pillar: R1600

  • Recoil adjustments:

-Crossbolts: We supply and fit crossbolts to prevent damage on rifles with high recoil, which could crack or damage stocks.

R950 each

-Muzzlebreak: Recoil dampening technique, especially effective on calibres with a hard kick.

R2360

-Mercury recoil suppressor: This device ensures recoil dampening of 15-40%, without changing the handling of the rifle.

R1950

-Recoil pad fitting: Proper fitting of after-market or replacement recoil pads.

R800 (excluding pad)

  • Refinishing and fitting:

-Stock refinishing: We remove scratches or dents, and apply a satin or oil finish.

R1600

-Refinishing: Metal is polished to remove damage if necessary and a new coating is applied.

Matte or satin reblueing: R1650

Guncote in black or silver: R1650

Cerakote: R3350

Cerakote 2 tone: R6700

Gloss blue: SQ, depending on damage

-Synthetic stock fitting: Proper fitting of after-market stocks.

R950

  • Custom stocks and rifles: We make stocks to restock your rifle, and can build rifles to your specifications and calibre requirements.

Quote available on request

  • De-activation: We de-activate your firearms for display purposes. The process takes up to three months.

R1500

  • Silencers: Fitting and barrel threading, including a thread protection cap.

R1149

 

Shotguns:

  • Full stripping, servicing and cleaning: All individual parts are checked for wear, cleaned and serviced if necessary before reassembling.

R720

  • Actions: Tightening of shotgun actions.

R1350

  • Firing pins: We make and fit pins.

R1000 each

  • Refinishing: Metal is polished to remove damage if necessary and a deep blue gloss is applied. This process may take two to three months.

SQ, depending on damage

  • De-activation: We de-activate your firearms for display purposes. The process takes up to three months.

R1500

 

Air rifles:

  • Refurbishing: Replacement of springs and seals on older air rifles.

R1000

  • Serial number stamping: We engrave these numbers on your rifle.

R450

 

PLEASE CHECK IN STORE FOR STOCK AVAILABILITY AND PRICES - admin@kalahariarms.com